Troubleshooting: No Bootable Device Found When Attempting to Install Windows 10 on an HP Laptop

When you encounter the 'No bootable device found' message while trying to install Windows 10 on your HP laptop, it can be frustrating. However, with the right steps, you can resolve the issue and successfully boot from your USB stick. Here are the detailed troubleshooting steps:

1. Check USB Stick Preparation

Ensure Proper Creation

Ensure your USB stick is properly formatted and that the Windows 10 ISO is correctly written to it.

You can use tools like Rufus or the Windows Media Creation Tool to create a bootable USB drive.

Ensure the USB is formatted as FAT32, as it is recommended for UEFI boot.

2. BIOS/UEFI Settings

Access BIOS/UEFI

Restart your laptop and press the appropriate key (usually F10, F2, Esc, or Del).

Check Boot Order

Navigate to the Secure Boot settings. If Secure Boot is enabled, try disabling it temporarily.

If you are using a BIOS that supports both UEFI and Legacy modes, try enabling Legacy Support or setting the boot mode to Legacy if the USB doesn't work in UEFI mode.

Note: It is crucial to save the changes in BIOS/UEFI before restarting your laptop.

3. Try a Different USB Port

Depending on your system, sometimes using a different USB port can help. Consider using a USB 2.0 port instead of a USB 3.0 port, as some older systems have issues with USB 3.0 during boot.

4. Check for USB Recognition

While in the BIOS/UEFI, check if the USB stick is recognized. Look for a section that lists connected devices. If you don't see the USB stick listed, there may be an issue with the USB or the port.

5. Recreate the Bootable USB

If the USB stick isn't recognized or if it still doesn't boot, try recreating it. Make sure to follow the steps carefully, ensuring the ISO is correctly written to the USB.

6. Connect the SSD Properly

Even if you are installing Windows 10, if you are still having issues, double-check the physical installation of the SSD. Ensure it is securely connected to the laptop's SATA connector.

7. Test with Another USB

If you have access to another USB stick, try creating a bootable Windows 10 installation on that stick to rule out an issue with the original USB.

8. Final Check

After making these adjustments, save the changes in BIOS/UEFI and restart your laptop. Ensure the USB stick is inserted before booting.

If you have gone through all these steps and still cannot boot from the USB stick, you may want to consider the possibility of a faulty USB stick or an issue with the laptop's hardware. If you need further assistance, feel free to ask!